Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground
Potential to all other ground terminals on the same rail. Ground blocks can also be used as end stops, preventing other terminal blocks and components from moving laterally on the DIN Rail. They are supplied with a standard green/yellow housing for easy identification and accept standard marking tags.
ITEM NO. |
SKJ-4/1-2JD |
Order No. |
01104 |
Dimension |
|
Width x Thickness x Height (mm) |
50.5/6.2/47 |
Screw (mm) |
M3 |
Torque (Nm) |
0.6-0.8 |
Stripping Length (mm) |
8 |
Rated data |
|
Voltage Rating (V) |
|
Current Rating (A) |
|
Wire section (mm² ) |
4 |
Wire Range |
|
Rigid wire range(mm² ) |
0.2-4 |
Flexible wire rangemm² ) |
0.2-4 |