Overhead line: Insulated Cu or Alu.
Branch line: Insulated Cu or Alu.
Insulation piercing in direct contact with live wires. Installation without stripping the main cable. One piece connector, no losable part, connector being an integral part of its cover facilitating its placing.
BODY Aluminium alloy.
Aluminium alloy screw (10 mm across flat). 1 or 2 branch lines independent of the degree of clamping on the main line, facilitating placing and removal. COVER Protection of the connection by a flexible PVC cover, integral with the connector. Connector can be energized after tightening of the cover is achieved thanks to the movable and not losable upper cap. Access to the branch cables screws, allowing to disconnet without opening the cover. SAFETY INCREASED.
F TYPE Fusible Head.
Overtorque breaking screw-head allowing a good clamping torque. This system ensures a high quality contact and avoids to damage the conductors strands. After head breaking, removal is still possible.
F2 TYPE
Connectors fitted with overtorque breaking head srews for main and tap conductors tightening.
IN ACCORDANCE WITH STANDARDS:
- EDF SPECIFICATION HN 33-E-61.
- UL 486 B.
| Type |
Main Line section mm² |
Branch line section mm² |
Dimentions
A |
B |
C |
Torque
N.m |
| JCF1-35/70/16-70 |
35-70 |
2X(16-70) |
71 |
51 |
77.5 |
14 |
| JCF1-35-95/2.5-35 |
35-95 |
2X(2.5-35) |
71 |
51 |
77.5 |
14 |
| JCF1-25/2.5-25 |
25 |
2.5-25 |
48 |
50 |
66.5 |
9 |
Whole Series
our Factory
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}